PM dstelly here at arcticchat, he's the guy to talk too!

 

Easy to do. i removed the crappy round filter box and ran it up with 2 inch Pvc thru the factory hole in the frame and put a uni filter with bucket to cover. The belt intake is almost ran for you. cut the curve off where it goes thru the opening next to the handle bars and add a 2" fenco fitting and extend with a 2 " pvc pipe. The rear belt exhaust will need a 1000 Tcat mud pro fitting to make the curve around the bely box the run 2' pvc around the front rt shock mount and up thru the 425 removable cover behind the 2 intake snorkle risers.

 

Could you build me one? Like cut all the pieces to wear if just have to put them in place?

 

If you could, would you build me one? I'm gonna be honest I'm only 14

 

how about that, i just bought a 425i yesterday as well and was wondering the same thing.
except you could add a lift kit to that too....

 

Ok easy to lift. Add regular cat front shocks to the front to add 2". For the rear redrill bottom shock mount hole 3/4" up and over in the lower a arm. That will also give ya a 2" lift.

 

Yes there's 1.5 and 2.5" lift at MudTechinc!

 

Those kits are not going to work on 425 suspension.

 

yeah, im having a tough time finding anything for it.

 

Your kiddin me right? I just ordered the 2.5 lift....

 

No I'm not kidding, you better CANCEL your order now or you'll be sending it back.

 

Make your own by redrilling rear arms and using regular cat front shocks.

 

Nope, if you would see the crap I put my bikes though you would understand why....Cat needs to follow me around making commercials,lol