Arctic Cat Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
1,009 Posts
Discussion Starter #1
anyone have a 04 zr 900 with dd and a 10.4 upgrade secondary ,and what size belt are you using
 

·
Registered
Joined
·
1,009 Posts
Discussion Starter #3
the sled came with a 10.0 we put the 10.4 upgrade on it the diameter of the secondary larger.the 032 belt is to small i tried one of my 044 and seemed to be to tight
 

·
Registered
Joined
·
409 Posts
This might be an issue with clutch upgrades as opposed
to a whole kit, not quite sure.

Someone will chime in on this, there are plenty of guys here with 10.4 upgrades
on 900's to answer this.
 

·
Registered
Joined
·
98 Posts
Hey Grinch..........I've got a 05 zr9.......I did the 10.4 upgrade, you have to use the 06 ZR9 belt, the 06's came with the 10.4 Mine was a little snug so I dropped the belt a little deeper into the secondary, the top of the belt couldn't be any more than just a hair above the secondary sheaves for mine to work......if I tried going any higher in the sheaves the belt would squeel in the primary and the sled would try to walk away while idling......when I dropped it a little deeper into the secondary all was well......
 

·
Registered
Joined
·
98 Posts
Carlisle XS811 is a replacement for Cat's 045 on the 06 ZR900.......or any DD ZR900 with the 10.4 conversion......
 
1 - 8 of 8 Posts
Top