[araustev]

Have a 2001 Z370, fuel gauge is not working. Can anyone tell me how to replace, how does the gauge come out of the tank, is it press fit into the tank ? Replacement parts seem available just have not had time to look at how to remove from tank.
Any help would be appreciated.

 

[Mike R]

They just pop out. Chances are everything you need is still in the tank. They fall apart. Fish everything out and then clean the holes in the guage part with alcohol. Use a epoxy to put it back together and you should be good to go. Make sure you try it before you epoxy it. They can be put together 180 degrees from what they should be.

 

[araustev]

thanks a bunch, will take a look.