Arctic Chat : Arctic Cat Forum banner
1 - 12 of 12 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Hello I have a 97 arctic cat puma 340 that won’t idle. I’ve cleaned the carb and tried changing the mixture and idle screw with no success.I took the carb off and made everything was seating correctly and the slide was not going all the way down. The idle screw won’t touch it even all the way in.
Anything helps thanks.
 

·
Registered
Joined
·
116 Posts
So when you had the bowl off were you able to look through both the pilot and main jets? Looking into a light you should be able to see through both. The pilot has given me grief before and it affects from idle to 1/8 throttle I believe.
 

·
Registered
Joined
·
49 Posts
the OP stated in his first post that the slide is not going all the way down. the idle adjust screw
would not touch the slide. this guy is playing games whith us . he is not telling us much info.
won,t idle???? is it idleing way to fast??? if the slide won,t go all the way down , it should be screeming .
 
1 - 12 of 12 Posts
Top