[Buster F]

Hey guys, I have a 94 Wildcat and was hoping someone could tell me what the yellow wire on the kill switch is for. Also, i see that the kill switch is tied into the throttle with another small (blue) switch - what is the purpose of this blue switch? Thanks, Roy

 

[finnyfarm]

I have the same sled, those wires go into a plug that is for an emergency bypass plug. If a loss of return spring force occurs with the throttle(ice build up on the throttle plates or something else), the ignition monitor will kill the engine. If you plug your bypass plug into that harness, it will get you to the trailer. Just be careful that the throttle is working good enough, not sticking. That bypass plug is your kill switch when installed, unplug to kill.