Arctic Cat Forum banner

1 - 9 of 9 Posts

·
Registered
Joined
·
146 Posts
Discussion Starter #1
Well the title asks the Question. My buddy wants to install a taller track on his EXT without changing drivers or relocating the suspension.We were thinking 1.5 but are not sure. My T-cat has a 1.5 camoplast challenger track and it has enuf bulkhead clearance gut it has a 99 T-cat skid that was mounted lower in the tunnel. The tsl arms are mounted below the tunnel. He dint want to do that much modifications. Rockerdude
 

·
Registered
Joined
·
659 Posts
I have been running a 1.5 on a 96 zr 580 efi ett, and have no problems. about 1/2" clerance to the front cooler, the track is notched from the factory on the outer lugs and this gives it about 3/8" to the tunnel coolers.
 

·
Premium Member
Joined
·
2,057 Posts
I think the ZR got the ETT somewhere mid year in 1996. My 96' ZR did not have it.
 

·
Premium Member
Joined
·
463 Posts

·
Registered
Joined
·
105 Posts
1 for stock track .if updated to ett track can go 1.25 buddys 96 zrt only way it would fit.he been running 1.25 for 3 years now.
 
1 - 9 of 9 Posts
Top