Arctic Cat Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hey guys, we bought the grandson a snowmobile and as luck would have it he hit a tree, he's fine but hood is not ! We are trying to find out what other hoods will fit his 2003-Z370 , will a 2001 440 or a 2001 ZR600 fit, if not can anyone please give us a list of ones that will so we can search the salvage places. Thanks for your help in advance.
 

·
Registered
Joined
·
1,005 Posts
There are other hoods that will simply fit, but since the 370 is a fan cooled sled, you might need to find the correct hood, specifically from another 370 or perhaps a 570, that have the air holes machined into the hood and the air directors under the hood. And I wouldn't trash the hood you have until you find a replacement, you might be able to get one from a liquid cooled sled and fab the duct holes in the hood...
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
There are other hoods that will simply fit, but since the 370 is a fan cooled sled, you might need to find the correct hood, specifically from another 370 or perhaps a 570, that have the air holes machined into the hood and the air directors under the hood. And I wouldn't trash the hood you have until you find a replacement, you might be able to get one from a liquid cooled sled and fab the duct holes in the hood...
Thank you for your reply. We looked at hoods on sale on line and can’t find a Z370 hood any where. We we’re hoping that a hood from another sled from that year or years close to it might be the same even though engine sizes may be different, Finding a year and model sled with the same hood is super difficult. Wish Artic Cat would create a list for parts of sleds that are interchangeable. So we could enter 2003 Z370 hood and it would show other years and models with the same design to fit.
 

·
Registered
Joined
·
1,005 Posts
Likely, any ZR3 hood will fit your sled, there are a lot of models that use that hood. You'll need to do some fabbing and parts transfer from your hood for the air cooled ductwork.



Search for one that looks like yours. You may have to settle for a different color and decals....

Here are a couple from a Z570:


 

·
Registered
Joined
·
3 Posts
Discussion Starter #5
Likely, any ZR3 hood will fit your sled, there are a lot of models that use that hood. You'll need to do some fabbing and parts transfer from your hood for the air cooled ductwork.



Search for one that looks like yours. You may have to settle for a different color and decals....

Here are a couple from a Z570:


Thank you for your help, it’s very appreciated !
 
1 - 5 of 5 Posts
Top