Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
1,473 Posts
Arctic Cat
unfortunately they skipped the brake pad replacement in this book, but you will find lots of other juice stuff...click on service manual. To get to the brake pads you must remove the entire brake caliper. The pads will fall out so take some pics as you go. Remove the 2 bolts that hold the caliper to the chain case. slide the caliper up and then back to get to the pads. There are 2 pins and metal plates that push on the pads...clean them up good. Have fun....you'll figure it out. You need 8 oz of 80 wt gear oil for the chain case.
 
  • Like
Reactions: BrandonTanner26

·
Registered
Joined
·
1,473 Posts
hand grinder to remove rivets.
 
1 - 2 of 2 Posts
Top