Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
5,691 Posts
To do a track swap you will have to remove the rear suspension, then open up the chaincase and remove the bottom gear so you can drop the driveshaft and cogs out. Then the track will come out and just reverse the procedure when installing. Though since its apart you might as well replace both the driveshaft bearings. While its not an overly difficult job, just more time consuming and a PITA, having an extra set of hands around will help alot too.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top