I have a 99 Bearcat 500 that needs a top end rebuild. I was talking to a local bike shop the other day. He said that, since it has a Suzuki motor, he might be able to find an overbore piston for it. My question for those in the know...since the sleeve is chrome lined, can it even be bored out? I'm thinking the sleeve may be too soft without the chrome lining to hold up.
That's what I thought. Where does one order a piston and sleeve kit? I have seen pistons listed as size A, B, AND C, all slightly different diameters, from Nakamura. How does one know which size to get for a given sleeve, if a kit isn't available?
Anyone played the troubleshooting game of Diff Lock not engaging and/or 4WD not working properly. I can punch the rocker switch and/or diff lock lever, and I hear the actuator moving in and out as if it is engaged. As you ride or start bike, it goes off. I thought there was a loose cable on...
hey guys
do you know where i could get a foot brake master cylinder for a 05 arctic cat 400 4x4?
bought one off ebay and of course it doesnt fit. and if i look on the arcticcatpartshouse it dose not have it listed anymore.
I have a 1998 Arctic Cat 500 4x4 with just under 2,000 miles. This past weekend I was on a hunting trip, driving across a field, and happened to notice over my left shoulder that my left rear tire was sticking out about 2 ft past the fender....I immediately headed to the trailer and loaded it...
Hey, I did a search and didn't find much. I was wondering if anybody has relocated their oil cooler on a 400. Frankly, I don't trust the 'overheat light', and have never heard my fan come on. I was thinking of putting it on the front rack, like the bigger water cooled machines have. I have seen...