Arctic Cat Forum banner

1 - 7 of 7 Posts

·
Registered
Joined
·
89 Posts
Discussion Starter #1
Can you guys help me out. What tools do I need to change my weights and springs. I see so many different ones on the market that it is confusing
 

·
Registered
Joined
·
1,009 Posts
ya need a clutch puller its best to pull it off,i got mine from hi performance engineering(hiperf,com)part #725-207 other than that ya need a 7\16 wrench and a 7\16 socket and a allen wrench set for the weights ,there is a set screw on the weights Cat happy
 

·
Registered
Joined
·
1,009 Posts
ya might be able to but i dont think ya got enough room to get the bolts out ,just makes a hell of alot easier to take it off
 

·
Registered
Joined
·
152 Posts
I just did mine without pulling the cluth off. Not bad at all imo. You will need some heat to heat up the weights to brake that damn red locktite that is on the stock weight set screws!
 

·
Registered
Joined
·
1,330 Posts
<div class='quotetop'>QUOTE (firecat f7 @ Nov 18 2009, 08:05 PM) <{POST_SNAPBACK}></div>
I just did mine without pulling the cluth off. Not bad at all imo. You will need some heat to heat up the weights to brake that damn red locktite that is on the stock weight set screws![/b]
you can change the weights by prying open with a screw driver
 
1 - 7 of 7 Posts
Top