Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Premium Member
Joined
·
558 Posts
Discussion Starter · #1 ·
I was at the dealer today and they showed me information from Cat where by swapping the dually skags that come on the new F series machines, left to right, and right to left, that better turning abilities could possibly be achieved?

The carbide edge is on the outside on our F6, curious if anybody did the swap and moved the carbide to the inside of the ski and how the sled handled afterwards, any changes?

I have a set of 6 inch Shapers ready to go, but I wanted to burn these Duallys down first and put the Shapers on after.
 

·
Registered
Joined
·
691 Posts
Will look at mine tomorrow...Going away for a 3 day trip withe the wife and daughter.....Gonna SNOWMOBILE....Finally...LOL.... Will look at it tomorrow and try it out. Thanks for the info. :beer_cheers:
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top