Arctic Cat Forum banner

1 - 5 of 5 Posts

·
Registered
Joined
·
407 Posts
Discussion Starter #1
I got these pipes today they came off an 06. so far I have them on but they leak pretty bad at the flanges. theres no hooks on the flanges for the pipe springs to hook to. and no rubber donuts on the flanges. the guy I got them from said the pipes were fine and he didnt have and rubber gaskets on his. I have the springs holding the pipes to the flanges by hooking the them to the bolt holes but they still are a little loose and leak. Does anyone else have these pipes and do they have gaskets??? thanks
 

·
Registered
Joined
·
87 Posts
i have these pipes. and mine do have gaskets on each exhaust doughnut. speedwerx could hook you up with some. or check to see if you can use the one off of your stock exhaust. then you would only have to get one more.
 

·
Registered
Joined
·
1,213 Posts
Sounds like you are just missing the donut gaskets our part # 5211592 they are like 9.95 each in stock.

www.speedwerx.com or 651-982-6020

Also the springs are supposed to hook from the pipe to the slots in the flanges.
 
1 - 5 of 5 Posts
Top