Arctic Cat Forum banner

1 - 1 of 1 Posts

·
Premium Member
Joined
·
2,622 Posts
Discussion Starter #1
I got these numbers from Jeremy at Speedwerx. There have been some people asking what the numbers are so I thought I would post what he sent me.

Please remember, these numbers are for running a Speedwerx y-pipe, a Speedwerx Single on 2007-09 Crossfire or M1000's.

<div class='quotetop'>QUOTE </div>
2007-2009 CROSSFIRE 1000 & M1000 SINGLE PIPE

Parts Include

1 - Tuned Pipe (AC1000S-4-P)
1 - Tuned Y-Pipe (AC1000Y)
1 - 2" Exhaust Donut (5211592)

INSTALLATION
1.) Read through entire instruction sheet before starting installation. If you have any questions please call our tech line. (651.982.6020)
2.) Remove stock pipe & Y-pipe. Save your stock gaskets, you will be using some of them.
3.) Install new Speedwerx Y-pipe re-using your stock exhaust gaskets.We suggest using some high temp silicon on them to prevent leaking.
4.) Install new Speedwerx single pipe and spring into place using your stock springs and new 2" exhaust donut (5211592) installed on the stinger (outlet) of the pipe. DON'T FORGET TO RE-INSTALL THE PIPE PROBE INTO YOUR NEW SPEEDWERX PIPE!
5.) Double check pipe an hood clearance! Speedwerx is not responsible for any damage that may occur if the pipe and Y-pipe are ran after incorrect installation or improper fit.

EFI Adjustments & Fuel (BOONDOCKER SETTINGS)

2007 SPECS ONLY!
Boondocker Settings (10,000 ft. + With ACHFI-2 & V-Force Reeds)
(3000) -2 / -1 / 0 / 0 (5000) 0 / 0 / 5 / 0 (6500) -5 / -6 / -6 / 0 (7200) -5 / 0 / 27 / 0 (7500 & 7800) 0 / 0 / 27 / 0
Boondocker Settings (5,000 ft. - 9,999 ft. - w/ Stock Air Box)
(3000) 0 / 0 / 0 / 0 (5000) 0 / -1 / 0 / 0 (6500) 0 / -3 / 14 / 0 (7200) 0 / -3 / 16 / 0 (7500 & 7800) 0 / -3 / 16 / 0
Boondocker Settings (0 - 5,000 ft. - With ACHFI Billet Aluminum Intake)
(3000) 0 / 0 / 0 / 0 (5000) 0 / 0 / 0 / 0 (6500) 15 / 15 / 0 / 0 (7200) 0 / 0 / 20 / 0 (7500) 0 / 7 / 25 / 0 (7800) 0 / 0 / 25 / 0
Boondocker Settings (0 - 5,000 ft. - With ACHFI-2 Lightweight Intake)
(3000) -5 / -5 / -6 / 0 (5000) 2 / -5 / -5 / 0 (6500) -5 / -6 / -6 / 0 (7200/7500/7800) 0 / 0 / 27 / 0

2008 SPECS ONLY!
Boondocker Settings (10,000 ft. + With ACHFI-2)
(3000) 0 / 0 / 2 / 0 (5000) 1 / 2 / 0 / 0 (6500) -4 / -4 / -4 / 0 (7200) -3 / 3 / 25 / 0 (7500 & 7800) 0 / 5 / 25 / 0
Boondocker Settings (5,000 ft. - 9,999 ft. - w/ ACHFI-2 Lightweight Intake)
(3000) 2 / 3 / 2 / 0 (5000) 5 / 3 / 3 / 0 (6500) 5 / 8 / 10 / 1 (7200) 3 / 6 / 13 / 1 (7500) 2 / 6 / 12 / 1 (7800) 1 / 6 / 14 / 1
Boondocker Settings (0 - 5,000 ft. With Stock Air Box)
(3000) 0 / 0 / 0 / 0 (5000) 2 / 2 / 2 / 0 (6500) 5 / 5 / 5 / 0 (7200) 3 / 10 / 16 / 0 (7500) 3 / 6 / 17 / 0 (7800) 3 / 6 / 17 / 0

2009 SPECS ONLY!
Boondocker Settings (0 - 5,000 ft. - With Stock Air Box)
(3000) 0 / 0 / 0 / 0 (5000) 0 / 0 / 0 / 0 (6500) 0 / 0 / 0 / 0 (7200) 0 / 0 / 10 / 0 (7500) 0 / 3 / 17 / 0 (7800) 0 / 3 / 17 / 0
Boondocker Settings (0 - 5,000 ft. - With ACHFI-2 High Flow Intake)
(3000) 0 / 0 / 0 / 0 (5000) 3 / 3 / 3 / 0 (6500) 3 / 3 / 3 / 0 (7200) 0 / 0 / 10 / 0 (7500) 0 / 3 / 17 / 0 (7800) 0 / 3 / 17 / 0
Boondocker Settings (9,500 - 12,500 ft. - With ACHFI-2 High Flow Intake)
(3000) 3 / 2 / 1 / 0 (5000) 0 / 0 / 3 / 0 (6500) 0 / 0 / 4 / 0 (7200) 2 / 4 / 25 / 0 (7500) 0 / 5 / 28 / 0 (7800) 0 / 6 / 30 / 0

Suggested operating rpm is 7500 - 7600.

CLUTCHING

2007 CROSSFIRE 1000 (0-4,999 Ft.) - Clutch Kit Part #CKAF1-S
2007 M-1000 (0-4,999 Ft.) - Clutch Kit Part #CKAM1
2007 M-1000 / CROSSFIRE 1000 (5,000-9,999 Ft.) - Clutch Kit Part #CKAM1-HA
2007 M-1000 / CROSSFIRE 1000 (10,000 Ft.+) - Clutch Kit Part #CKAM1-HA-1

2008 CROSSFIRE 1000 (0-4,999 Ft.) - Clutch Kit Part #CKAF1-2
2008 M-1000 (0-4,999 Ft.) - Clutch Kit Part #CKAM1-2
2008 M-1000 / CROSSFIRE 1000 (5,000-9,999 Ft.) - Clutch Kit Part #CKAM1-HA-2
2008 M-1000 / CROSSFIRE 1000 (10,000 Ft.+) - Clutch Kit Part #CKAM1-HA-1-2

2009 CROSSFIRE® 1000 (0-4,999 Ft.) - Clutch Kit Part #CKAF1-3
2009 M-1000 (0-4,999 Ft.) - Clutch Kit Part #CKAM1-2
2009 M-1000 / CROSSFIRE 1000 (5,000-9,999 Ft.) - Clutch Kit Part #CKAM1-HA-2
2009 M-1000 / CROSSFIRE 1000 (10,000 Ft.+) - Clutch Kit Part #CKAM1-HA-1-2

MORE SPECS COMING SOON! BOTH BOONDOCKER FUEL SETTINGS AND CLUTCH SPECIFICATIONS, PENDING SNOW CONDITIONS. CALL TECH FOR DETAILS!

We offer kits for all applications, please call our tech line or see our website to for more information or to place an order.[/b]
I hope these help you guys out that were looking for the numbers. If you have specific questions about these numbers or need something else, please email Speedwerx directly at [email protected]eedwerx.com. If you PM or email me with questions, I will not respond. I am not the expert and they have put the R&D into their products and testing.

Nick
 
1 - 1 of 1 Posts
Top