Arctic Chat : Arctic Cat Forum banner
1 - 8 of 8 Posts

·
Registered
Joined
·
200 Posts
Discussion Starter · #1 ·
I was riding my H1 sunday and had to jump start it to load it in the truck in a.m.(left key on)
anyway when i did, i lost the readout in my speedo-head.
everything still works fine on the quad just the screen is blank , like the key was off .
checked visible fuses under the seat ...does anyone know how to check the diodes?
anyone know of a fusiblelink somewhere in-line?
my H1 is only 3 months old and dealer said it would be a MONTH before they could get to it..i dont want to wait!
please HELP....
THANKS IN ADVANCE
 

·
Registered
Joined
·
1,084 Posts
when I pull start mine with battery out it starts right up with the key in the ignition on position but there is no display. Sounds like a dead battery or wires are off.
 

·
Registered
Joined
·
200 Posts
Discussion Starter · #6 ·
just updating on my findings...have changed speedo head out with one from wifes 2007 400 and the speedo head worked fine on hers and hers went blank on my H1..So is it a ECM problem? cant get it seen by dealer until 25th
 

·
Premium Member
Joined
·
19,631 Posts
Your gauge may have suffered a voltage spike (power surge) during the jump start which blew it out. I would swap out the Accessory fuse, just to make sure though.
 
1 - 8 of 8 Posts
Top