Arctic Chat : Arctic Cat Forum banner
1 - 9 of 9 Posts

·
Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
I'm buying a 2005 sno pro 440 trail converted I'm wondering what all needs to be done to bolt an f7 engine in it I know it been done many times but I'm wondering do the 440 clutches work with the f7 engine the chaincase the exhaust motor mounts basically I would buy a used engine off ebay with oil pump stator flywheel and recoil and wondering what else I would need.

Thanks, Sam
 

·
Super Moderator
Joined
·
8,548 Posts
I'm buying a 2005 sno pro 440 trail converted I'm wondering what all needs to be done to bolt an f7 engine in it I know it been done many times but I'm wondering do the 440 clutches work with the f7 engine the chaincase the exhaust motor mounts basically I would buy a used engine off ebay with oil pump stator flywheel and recoil and wondering what else I would need.

Thanks, Sam

secondary will if you calibrate it for the 7. The 440 primary will not fit on the 7. You will need everything from a F7 to make it run. Pipe, wiring, ECU, Fuel pump If efi, Injectors if going to EFI or F7 carbs if staying carbed.
 
1 - 9 of 9 Posts
Top