Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
229 Posts
Discussion Starter · #1 ·
Cleaning the sled up tonight and notice...

2010 CF8

After I removed the belt and started to remove the secondary bolt, I notice the inside sheave would wiggle. It only wiggled when the bolt was holding the sheaves part way open and part way closed. If the bolt was tight (sheaves open) or bolt was removed (sheaves closed) it didn't wiggle.

When it wiggled it seemed like it was floating with the spring.

Does this seem normal? Or do I have problems in the near future?

Thanks in advance for your help!
 

·
Registered
Joined
·
693 Posts
I have had my secondary on and off a bunch of times over the years ('09 Crossfire R 800) and I never really grabbed it and wiggled it but if you think about it when you open it up with the bolt and separate the halves the sheave will move slightly on its bushing because there is clearance between the two. I would call that totally normal.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top