Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5,691 Posts
You will have to remove the whole seat and gas tank assembly, so best to do with a empty tank of fuel. There are only 2 bolts that hold the seat on and they are at the back in the truck (and up in the tunnel). Remove tose two bolts and then lift up and pull back to remove the seat, unhook the wires for the tail light and the fuel line. Then its just removing the staples form the cover and I believe 1 screw to get the seat and cover off.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top