Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter · #1 ·
Looking to to replace the bearings on the idler wheels on my ‘19 ZR with 137 track. Can I loosen the track enough to remove and reinstall the idler wheels without pulling the skid? The rear idler wheels need to be addressed the most.
 

·
Registered
Joined
·
966 Posts
Absolutely possible. But a pretty huge wrestle.
Two bolts hold the skid. Much easier working on the bench.
If the rear idlers need attention, then the uppers more than likely do as well.
Skid needs to come out. It's the best choice in the long run.
 

·
Registered
Joined
·
5 Posts
Discussion Starter · #3 ·
Absolutely possible. But a pretty huge wrestle.
Two bolts hold the skid. Much easier working on the bench.
If the rear idlers need attention, then the uppers more than likely do as well.
Skid needs to come out. It's the best choice in the long run.
Copy that, will more than likely go the skid removal route and address the other idlers. Thanks for the input!
 
1 - 3 of 3 Posts
Top