Arctic Cat Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
11 Posts
Discussion Starter #1
Having an issue popping out the CV joint so I can replace both boots. I understand there is a c clip holding it in and a good pop will release it. No such luck.Any suggestions ?
 

·
Registered
Joined
·
10,514 Posts
Yep, it’s a small C clip holding it in. Try taking opposite side axle out. You can get a long pointed punch in there and hammer it out while someone is pulling on it. There’s a small dip in inner cup where punch will sit.
 

·
Registered
Joined
·
963 Posts
I use a air chisel and it's very easy. Put the chisel against the axle lip and just bump the trigger and they pop rite out.
 
1 - 3 of 3 Posts
Top