Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter · #1 ·
i had dealership, install a wildbore rad relocate kit on my 06 650hi on first start coolent everywhere, there was a slice in coolent lines( hoses came with kit ). have to replace hose, first ?, is there a pressure rating for coolant lines. second of all where is the resavoir would they have taking it off, i put new hose on. went to fill quad took rad cap off and appears full am i checking this right
 

·
Registered
Joined
·
435 Posts
When i did my radiator lift I just left the cap off till it got hot for the first time. Reason for this is to make sure you get ALL air out of the system. I filled a little more fluid and put the cap on.
 
1 - 3 of 3 Posts
Top