Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
2 Posts
Discussion Starter · #1 · (Edited)
I am working on a 2003 f7. Does the servo motor stop in the same place when the power valves are closed. If I set my cables at 34.5 mm there is to much slack like the motor turns to far. If they are set at 28mm works somewhat better. Something doesn’t seem right though. This is the closed position.
Light Automotive tire Motor vehicle Automotive design Rim
 
1 - 1 of 1 Posts
Top