Arctic Chat : Arctic Cat Forum banner
1 - 4 of 4 Posts

·
Registered
Joined
·
28 Posts
The 1971 track has full width cleats and is driven by the drive shaft on those cleats. The 1974 track will have the 2/3 width cleat design and is driven by the internal lugs molded into the track and not off of the cleats. So if the track length is the same you would need to change your drivshaft to the 1974 design in order to drive the modled in lugs.
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top