Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
25 Posts
Discussion Starter #1
Hey all,

I have a new 2019 XF9000 HC and I've had 2 occasions now where the sled will flash P100A and cut power. I know this is the TSS trying to prevent a runaway, but the sled is in no danger of doing so. The first time it happened I was gently feathering the throttle to get across a parking lot. It cut power for a second and then it was fine. The second time I went to give it a little throttle to back it up from my garage and it happened again. I've seen other threads on the matter, but it seems they had the issue arise when no throttle is being applied. Mine has only happened when applying throttle.

Long story short, will loosening my throttle cable a tiny bit also solve this issue, or do I need to take it to the dealer?
 

·
Registered
Joined
·
1,139 Posts
I had a stall sometimes during parking lot driving, when turning the bars hard. Loosened the cable a bit, problem solved. Check out a friends sled that doesn't have that issue, and match your tension to theirs.
 
1 - 2 of 2 Posts
Top