Arctic Cat Forum banner

1 - 10 of 10 Posts

·
Registered
Joined
·
7 Posts
Discussion Starter #1
I am replacing bearings and seals in drive clutch due to oil in clutch box. Since I am in there I am thinking of removing the one way bearing. Any thoughts on this. Thanks.
 

·
Registered
Joined
·
10,386 Posts
Lots of guys do it. Just remember you lose your engine braking. Personally I left mine in my quad as I don't mind that feature.
 

·
Administrator
Joined
·
37,083 Posts
If it fails dealers are instructed to remove it.
 

·
Registered
Joined
·
381 Posts
Pull the clutches, drain the oil, and remove the inner cover. The oneway rides on the wet clutch hub, it can be removed by hand. Keep it for a paperweight, that is about all it is good for! LOL
 

·
Administrator
Joined
·
37,083 Posts
1 - 10 of 10 Posts
Top