Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
23 Posts
Discussion Starter #1
Maybe someone here can help. My 07 650 TBX (sometimes) will spin but has no spark and will not start. If I disconnect the 3 black wire connection coming from the magneto, it starts every time. When I reconnect them it may or may not stay running. If it stays running, it may not start again or work fine for several days. I have 2 machines. The plug, coil, c-box and voltage regulator from the bad machine work fine in the good one. These parts(one at a time) from the good machine don't help the bad one. I've cut every zip tie to the frame and wiggled every wire looking for a bare wire. I'm running out of ideas. Any suggestions or experiences? Thanks
 
1 - 2 of 2 Posts
Top