Arctic Cat Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
69 Posts
Discussion Starter #1
On my 04 400 FIS, there is no sound coming from the front actuator when switched to 4wd and back.
Is there a known fix that bypasses the actuator so I can permanently lock it in 4wd as that is all I use?. .

Thanks
 

·
Administrator
Joined
·
7,608 Posts
You can remove the actuator and clean in internally. It might fix it. Order a new one if you want 4 and 2 wheel drive. If you disassemble the actuator, you could probably rig it so that it is in 4wd all the time, its a pin that pushes outward into the front differential. The actuator must be reinstalled otherwise water/debris will fill the front diff.
 
1 - 4 of 4 Posts
Top