Arctic Chat : Arctic Cat Forum banner
1 - 4 of 4 Posts

· Registered
Joined
·
47 Posts
Check for cracks in the bulkhead in front of your chaincase and roughly the same area on the left side...

You may want to replace your driveshaft bearing on the left side too before you get out on the snow...
 

· Registered
Joined
·
47 Posts
These motors were fairly solid. The bottom end (crank) was the basis for the 500, 600 series.

The chasis is the biggest fatigue issue with these sleds.

I would try and find some rail braces for the skid frame (these came stock from 2K on I believe on all ZR's).

Other than that there wasn't many issues with these sleds... I have a good buddy that rides one (it is bent about 9 ways from Friday, but it goes to beat he!!).
 
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top