Arctic Chat : Arctic Cat Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
4 Posts
Discussion Starter #1
Picked up a 04 400 4x4 automatic FIS that has been setting for about 3 yrs because of no spark, Flywheel had 4 loose magnets. Replaced flywheel and stator, still no spark. started running voltage and ohm checks, resistance is right, but no voltage from the trigger coil, source coil or charging coil. voltage on White and blue wire on coil with key on starts at 210 volts and climbs till key is turned off, then drops to 0 volts. Have pulled it apart several times and double checked everything. Any help would be greatly appreciated.
 

·
Administrator
Joined
·
38,969 Posts
Your machine is not a DVX. Post in the utility atv forum to get help.
 
1 - 3 of 3 Posts
Top