Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
896 Posts
Discussion Starter · #1 ·
I'm concerned with the mounting in this position. Is it going to get in the way, am I going to knee the thing when jumping around on the sled?

Don't mind the mount itself, it's the first draft.

[attachment=60432:DSC00818.JPG]

[attachment=60433:DSC00819.JPG]
 

·
Registered
Joined
·
160 Posts
On the M sleds I have always mounted mine right in front of the stock guage. Pull the stock guage, take a file and file a small window at the bottom of the stock guage cutout to run your wires through to the EGT. That way if you ever pull the guage you don't have any big holes. Then mount the egt on a thin aluminum sheet with velcro. You will have limited visibility of the digital portion of the stock guage but you will be able to see the analog needle just fine.
 
1 - 3 of 3 Posts
Top