Arctic Chat : Arctic Cat Forum banner

1 - 8 of 8 Posts

·
Registered
Joined
·
17 Posts
Discussion Starter #1
im having problems with my 06 arctic cat 650 v2 was leaking gas through the overflow valves on the carb thought it needed new jet needles so i replaced them put new spark plugs on it also. Vacuum tested it at 10 psi nd it was holding vacuum so I took it out for a ride was working fine until like 3hrs of riding it started leaking gas again through one of the overflow valves wht do y'all guys suggest the problem is do y'all guys think if I put a manual fuel regulator will it help out seems like the fuel pump is pumping to much gas into the carb it's getting on my nerves since havn't been able to drive it in 2 months due to this prob any help will be greatly appreciated

Thnks, silverbeast
 

·
Administrator
Joined
·
38,965 Posts
Did you set the float heights?
 

·
Registered
Joined
·
126 Posts
buy your parts from site like
dealercostparts.com

by carb parts for 2003 or 2004 Kawasaki prairie 650 to avoid cats markup. only differance is cat uses differant needle jet and you would not be changing that.
 

·
Administrator
Joined
·
38,965 Posts
1 - 8 of 8 Posts
Top