Arctic Cat Forum banner

1 - 3 of 3 Posts

·
Registered
Joined
·
49 Posts
Discussion Starter #1
I recently installed a D and D Y-pipe and power lite pipe onto my 06 Crossfire 700 along with an MBRP silencer. I'm currently running an orange spring and 71 g weights in the primary and an off white spring in the secondary with a D and D shift assist. The problem I'm having is a mid range bog with the power lite pipe that seems to disappear as soon as I put the stock pipe back on. Any suggestions on rectifying this problem? Maybe go to 73g weights? Thanks in advance for any input.
 

·
Premium Member
Joined
·
1,711 Posts
Probally is the normal back pressure issue. Leave the D&D y-pipe and power pipe on. Take off the -1 hp MBRP exhaust can and put the stock can back on and see if it bogs.
 

·
Registered
Joined
·
49 Posts
Discussion Starter #3
I would like to give that a shot but the I don't have a stock silencer. I bought the sled used and it came with the MBRP can already on it. Could probably find a used one for a pretty good price if I knew it would solve the problem though.
 
1 - 3 of 3 Posts
Top