Arctic Chat : Arctic Cat Forum banner

1 - 6 of 6 Posts

·
Registered
Joined
·
38 Posts
Discussion Starter · #1 · (Edited)
Ok here's the deal bought a bd turbo kit off Craigslist with no instructions contacted bd and they don't have them any more and they did give me the m1 instructions which helps i have every thing mounted turbo, intercooler , plumbing for coolant, fuel lines,and figured out wiring for the rectifier and capacitor for the oil pump and the external fuel pump . The turbo i believe is the disco potato (would have to look up # again to be sure) . The questions that i have are about how the boost reference lines should be ran. I've been torn on the placement of the transducer and where to get boost pressure for fuel regulator :wacko: i was told that this was a race gas kit for a m8 . I believe that the transducer, fuel regulator and blow off valve gets the boost reference from the stock oil injection lines that run into the reed boots if that's the case which i would have to run mix fuel which is fine. should a guy leave the oil injection pump there to oil the main bearings? I should also note i have v-vorce 3 reeds and spacers idk if i should run them as i found ppl have been having issues with reeds cracking on turbo sleds any and i mean any help would be helpful from you guys with turbo sleds thanx in advance
 

·
Registered
Joined
·
38 Posts
Discussion Starter · #2 · (Edited)
The turbo is a GT2860RS DISCO POTATO looking to run 10lb thinking av gas but 110 is also an option mixed with 91 will be running in 10,000 to 12,000 ft elevation also the secondary injectors are in the intake box.
 

·
Registered
Joined
·
152 Posts
I cant help you since I have no experiance with turbo but post an add on Snowest.com youll get way more responses and way faster responses. Hope this helps...
 

·
Premium Member
Joined
·
2,954 Posts
Agreed, more boost guys on there, and a few of them have boosted 7's.
 
1 - 6 of 6 Posts
Top