Arctic Chat : Arctic Cat Forum banner

1 - 11 of 11 Posts

·
Registered
Joined
·
183 Posts
Discussion Starter #1
I'm usually pretty good at putting things back together but this time not,
When installing the valve does the big chamfer face up towards the ceiling? I'm pretty sure it does but thought I'd ask here.
Cheers Ray
 

·
Registered
Joined
·
183 Posts
Discussion Starter #3
The more I'm reading, the more it says pointing downward( big groove in valve down) I can't believe I didn't take pics.
Cheers Ray
 

·
Registered
Joined
·
206 Posts
Don't get it wrong !!! I spent over $500 at 3 different dealers chasing my problem with that. Got hooked up with a Catmaster tech on a site. He insisted it was my valves causing my issues. Sure enough, i pulled them. Last time i cleaned them I put one in upside down. Easy way to remember. There is a "trough" on one face of the valve. Facing up holds oil, no good. It faces down
 

·
Premium Member
Joined
·
575 Posts
Either I've been putting mine in upside down, or the large beveled/ chamfered face, faces downward.
 

·
Registered
Joined
·
183 Posts
Discussion Starter #9
I understand John The groove that is 1" x1/4" goes down and so does the big chamfer on the valve, I just wish in the pic that they showed the little chamfer facing up.
Cheers Ray
 
1 - 11 of 11 Posts
Top