I have 2000 Panther 550, and the hydraulic brakes seems to "rub" lightly and make a little noise even when not engaged...is there a way to adjust them? I can't find anything in the manual. PLMK! Thanks!
You can take the brakes apart and make sure that everything is clean is is sliding properly. Also push the pistons in and make sure they are free and move. If you push in the pistons make sure you pump the brake after reassembly so you have brakes next time you need them. Otherwise if everything looks good and that doesn't fix it then you may have a warped brake rotor. Hope this points you in the right direction.