Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
32 Posts
I have New f-1000 and have Helmets with heat shields with the Co-Axle hook-Up. Some older artic Helmets have a unusual adapter but I believe even the arctic Helmets now have Co-Axle. I Purchased a quality accessory adapter from a Boat and Marine Shop. I got really lucky and found one with plug in leads that hook
up to the harness portion of a new electric shield kit. You can also splice if the connectors don't match. I now
simple plug in the accessory plug in Sled dash board. I do have a small exstention wire cord. The reason for this is many times I get off the machine and forget I am hooked up. The extenstion then just unplugs from Co-Axle and nothing Breaks. Also keep extra Cord and Converted AD Adapter in tool box along with small rachet and torx bit that fits front bolts only on dash for easy off and on of Hood!
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top