Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
162 Posts
Discussion Starter #1
I have a 1979 Jag 340. I disassembled the hex clutch but the bolts that hold the spider assembly on to the shaft snapped off... and thus the spider assembly can not come off the shaft... Help! Any suggestions? Thanks in advance.
 

·
Registered
Joined
·
325 Posts
I had one of those set screws snap off when re installing the spider assembly. Luckily there was enough outside of the spider to grab with mini vise grips and I got it out, I replaced all of those set screws with stainless allen head bolts and i ground them to a point on a grinding wheel. They seemed to work much better than those little square headed nightmares!
 
1 - 2 of 2 Posts
Top