Arctic Chat : Arctic Cat Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
14 Posts
Discussion Starter #1
Could someone please send me a write up or explain to me how to adjust belt deflection on my 2004 f6. I know there are shims in the secondary. I am just unsure how to go about this. My belt is fairly loose and i dont think the previous owner ever adjusted the deflection. Thank You
 

·
Super Moderator
Joined
·
8,442 Posts
Could someone please send me a write up or explain to me how to adjust belt deflection on my 2004 f6. I know there are shims in the secondary. I am just unsure how to go about this. My belt is fairly loose and i dont think the previous owner ever adjusted the deflection. Thank You

take 3 nuts of the cover. Remove cover and spring, remove helix, lift sheave off, remove a shim. Put sheaves back togeather, install helix, spring and clutch cover and you are done. The helix might not need to be removed. Its been a while since i took one of those apart. Note which hole the spring is in the cover.
 
1 - 4 of 4 Posts
Top