Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
352 Posts
Discussion Starter · #1 ·
Looking to get my heads machined down to take up a bit of the slop in my squish band. The question is how much of an increase should I expect to see in my compression ratio? Not looking to increase compression too much, I just want to lose a little from the .089 thou squish band I have. Looking to take about .029 thou off. What kind of compression increase will that give me. It's another 100.00 a head to have my combustion chamber machined to match and I would like to put that 200.00 somewhere else if I could.

Thanks all.
SPDFREEK
 
1 - 1 of 1 Posts
Top