Arctic Cat Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter #1
Hello All, I got a 2007 H1 650 TRV LE, sadly it had the common issue of low engine oil pressure which killed the top end parts.. trying to find a used 650 head but come up with nothing so far.. someone suggested to use a 700 head instead with a 650 HG, should work fine. Question is has someone did anything like this swap and was successful lol ? appreciate any help guys
 

·
Administrator
Joined
·
35,736 Posts
Right here

Breathing Life into a 650 H1
 

·
Registered
Joined
·
3 Posts
Discussion Starter #3
Thank you bud, although i couldn't find a direct answer to the question after reading the whole tread.. i found a used 700 head with a cam, cost wise it will work lol, since the 700 are significantly cheaper, wandering if it will fit and work, not looking to get more power out of it, just to fix it so it runs good enough to plow snow
 

·
Administrator
Joined
·
35,736 Posts
If you do what he did it will fit.
 
1 - 4 of 4 Posts
Top