Arctic Cat Forum banner

21 - 21 of 21 Posts

·
Registered
Joined
·
72 Posts
To keep this thread updated since I was seeking help I’ll post my conclusion, the ACC plug is DC volts on this sled along with the majority of other things are all DC volts. So I popped the 15 amp fuse on the voltage converter by accident and found my gauge cluster would not work along with the sled started to run like **** at one point.

So wiring the USB socket was a piece of cake! Just a simple 2 pin connector and ran it with wire loom along the main chassis harness to behind the speedo. Then just cut to length and crimped on 2 female spade connectors. The wires ran I made look factory even!






Sent from my iPhone using Tapatalk
 
21 - 21 of 21 Posts
Top