Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

·
Registered
Joined
·
3 Posts
Discussion Starter · #1 ·
I have a 2007 X-fire 6 Std. so far with 200 miles on it. The only problems I had are the bolt holding the sway arm on the passenger side was loose causing a noise since the sway bay would rotate in the bracket. After tightening the bracket the whole front end now makes a noise when compressing the suspension and making the sway bar rotate. Looking at this it looks like I need to pull the sway bar and lubricate the bushings or replace if bad. I am wondering if anybody else has had this type of problem, and if pulling the sway bar is relatively simple. Overall I am very happy with the sled’s performance on the trails but am waiting to see how well it does in deeper snow since I have road it in only about 12” to 18” of snow.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top