Arctic Chat : Arctic Cat Forum banner
1 - 3 of 3 Posts

·
Registered
Joined
·
108 Posts
Discussion Starter · #1 ·
What makes the plugs foul so much, i know its gettin to much fuel But could to much oil?? Only my right side will foul a plug. Left side never does...this is same machine that bogs on low end, but runs killer from mid to high end..Adjusted carbs and are snyched. But seem to foul out right side plug somewhat often...Gonna check e clip and see if they are the same, Does one cylinder need more fuel then other...Thought i read that somewhere...Just wonderin if carbs are on wrong cylinders.?
 

·
Administrator
Joined
·
7,968 Posts
I'm not sure which 700 you are talking about. ZR700? 1999/2000?
If so, they are both jetted the same on each side. Sounds like one of your clips is lower than the other one or you have a busted reed pedal. Clip in center (or 3rd position) 330 mains on the 99 is safe, 320's on the 2000 is also safe. 1&1/2 turns out on white tipped screws........tigger
 

·
Registered
Joined
·
492 Posts
ok, first off make sure your not using BR10s.....switch to 9s. and then what ever your needles are at drop them one clip.....made the world of a difference......
 
1 - 3 of 3 Posts
Top