Arctic Chat : Arctic Cat Forum banner
1 - 1 of 1 Posts

· Registered
Joined
·
97 Posts
It sounds to me like you need to do a little shimming in the secondary to get the belt sitting properly in the sheaves. Had the same problem with my brother's ZRT over the weekend. he put a belt on it it ran like crap. I popped the hood and checked the belt and it was sitting almost half an inch above the top of the sheaves. Way too tall. We put the old belt back on and voila, back to normal. It doesn't take long to adjust the seconday to get the belt where it needs to be.
 
1 - 1 of 1 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top