Arctic Cat Forum banner

1 - 5 of 5 Posts

·
Premium Member
Joined
·
1,711 Posts
Sure it can be done. Need tools and some other things. Plan on spending around $250 for the tools/nitrogen/oil (that is on the cheap side). Main issue is the correct piston depth for which you need a service manual as well.
 

·
Registered
Joined
·
6,670 Posts
I didn't buy all the special tools. A block of wood with a hole saw bit for the drill can work.

They are pressurized so be careful on dissasembly.

I have a local guy charge them with nitrogen for me.
 
1 - 5 of 5 Posts
Top