Arctic Chat : Arctic Cat Forum banner
1 - 5 of 5 Posts

· Registered
Joined
·
10 Posts
Discussion Starter · #1 ·
Hey all,
Fell into the no center caps trap by delta steel rims..
Asked my dealer before i bought the tires and rims if it came with center caps, said yes, but upon delivery low and behold, no center caps..
I emailed itp and asked if they sell them, said no only for 4/110 i got 4/115..
If i return the tires and rims i have to pay 75$ for a restocking fee..
I know others have fell into this but havent seen a post where they have solved the problem or where to get caps..
Any suggestions?

Thanks for your time
 

· Administrator
Joined
·
8,002 Posts
you dont need center caps at all, but what a way to sell wheels.
Measure the hole and ask some tire/wheel shops for advise, They might be able to come up with something that looks decent
 
  • Like
Reactions: clone101

· Registered
Joined
·
3,858 Posts
Hey all,
Fell into the no center caps trap by delta steel rims..
Asked my dealer before i bought the tires and rims if it came with center caps, said yes, but upon delivery low and behold, no center caps..
I emailed itp and asked if they sell them, said no only for 4/110 i got 4/115..
If i return the tires and rims i have to pay 75$ for a restocking fee..
I know others have fell into this but havent seen a post where they have solved the problem or where to get caps..
Any suggestions?

Thanks for your time


My suggestion would have been to check ITP's website before buying instead of going on what the tire dealer says.
ITP states that the center caps are not available for the 4/115 Delta Wheels.
No trap by ITP, your dealer is to blame for the so called "trap".
 

· Registered
Joined
·
10 Posts
Discussion Starter · #5 ·
Thanks for the replies,,
The tire dealer was a prick, tried to return them and then told me there wasnt an option to do so.. Even after i showed him the email where he said there was.. Blah.. live and learn..

Ended up finding some 3.5 push threw caps that would fit but i have a buddy that does siding and eve troughs, so got him to cut 7 inch squares of black aluminum , drilled holes for the bolts.. Looks like i have black diamonds in my silver steel rims, not sure how long it will last but did the job for cheap and doesnt look all bad..
 
1 - 5 of 5 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top