Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
209 Posts
Discussion Starter · #1 ·
what do i need to do to adjust my clutch to stop my overrev? i dont want to buy a clutch kit right now because next year i am going to get the head cut and ported and pipe. right now all i have is a timing key and a D&D y pipe. im hitting 8000rpm sometimes.
 

·
Registered
Joined
·
275 Posts
If it is an '03 or '04.....
Move the secondary spring 1 hole to the left (1 hole looser on wind-up). Not sure how experienced you are at clutch work.....let us know if you need more info. Watch out when you loosen those nuts holding the spring on in the secondary......that spring is under a decent amount of tension and will fly off if you not holding it down when that last nut comes off.

Not sure about the diamond drive clutches ('05 and '06)....I've never worked on one.
 
1 - 2 of 2 Posts
Top