Arctic Cat Forum banner

1 - 2 of 2 Posts

·
Registered
Joined
·
30 Posts
Discussion Starter #1
i installed a new berrings on my zr 600 but forgot which way the lower sprocket faces i installed it with the hub side facing in towards the drive cogs because the flang berring bolts i ran seems to be fine but need to be sure if its right.
 

·
Registered
Joined
·
659 Posts
If I understand what your saying by hub yes it's in correct..... or if you can read the part numbers they are stamped on the front side of the gears.
 
1 - 2 of 2 Posts
Top