Arctic Cat Forum banner

1 - 4 of 4 Posts

·
Registered
Joined
·
5 Posts
Discussion Starter #1
i have a 1998 arctic cat ZL 500, it got into a small accident, i got all the pieces i need, i have to remove my right belly pan. My son has removed the screw at the top after some pulling, when trying to pull out the bottem screm, we simply cant, it seems they're is too much pressure cause the spring. any ideas on how to get it off, then back on?
 

·
Administrator
Joined
·
7,797 Posts
Is the inner shock collar spinning with it? If so, a littel heat and then tap it, or worst case, drill it out
 

·
Registered
Joined
·
444 Posts
I did my front suspension 2 years ago and couldn't get the bolts out either. I ended up using liquid wrench, spraying it on 3 times a day for 2 days. On day 3 I used a 5lbs hammer and a punch and sure enough I got all the bolts out. Once they where out it was understandable why they gave me a hard time. All 4 where VERY rusty and 1 was bend from my crash.
 
1 - 4 of 4 Posts
Top