Arctic Chat : Arctic Cat Forum banner
1 - 2 of 2 Posts

·
Registered
Joined
·
8 Posts
Discussion Starter · #1 ·
Can you take an 06 STD suspension and place the suspension in the same holes as the 06 F7 sno pro? Are new arms required and or shocks? what's the difference between a sno-pro and standard other then shocks? Any input would be appreciated. Has anyone tried this. Pro vs con's would also be interesting to know

Aaron
 

·
Registered
Joined
·
261 Posts
The front of your rear suspension is already in the same holes - no difference there from standard to SnoPro. For the rear mounts, you'll need to install the drop brackets so it's not as simple as just moving things around.

Everything in the rear suspension is the same except for the shocks/springs and the limiter straps. (The front arm is a different part number because the SnoPro has a reservoir mount welded on the top of the arm) The front shock is a little shorter so the straps are shorter too.

Why would you want to move the suspension? It would give you any more travel and it will probably handle worse.
 
1 - 2 of 2 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top